Saturday, February 13, 2010

IC Pics Using a Standard Digital Camera Update

As you can see, I made a change to my layout. I added a lego brick housing to support the lens assembly along with the camera finally on my missing tripod, then a new ultra-bright flashlight.


Now for some more pictures :D

6 comments:

  1. Like the other guy posted great work, but if i may ask how did you strip off the top outer coating?

    ReplyDelete
  2. I think either HCL or HNO3. Correct me if I'm wrong. But I'm quite sure it is some type of acid.

    ReplyDelete
  3. Actually what I did was remove these ICs with a heat gun because they were covered in thermo-setting epoxy. Then I used an xacto knife to scrape it off very carefully. I believe sulfuric acid is used because HLC (hydrogen chloride) has a tenancy to dissolve certain kinds of metals.

    ReplyDelete
  4. cool, mau have to do this to a couple of older ones I've got in the basement, thanks!

    ReplyDelete
  5. did you get anywhere with the camera UI?

    ReplyDelete
  6. Awesome article, it was exceptionally helpful! I simply began in this and I'm becoming more acquainted with it better! Cheers, keep doing awesome! write for us

    ReplyDelete